Shaft and Pump Packings

Graphite Packing

Graphite Packing
Size Lin Ft/lb Size Lin Ft/lb
1/4" 28.0 7/8" 2.6
5/16" 18.6 1" 1.9
3/8" 13.3 1-1/8" 1.5
1/2" 7.7 1-1/4" 1.23
9/16" 6.1 1-3/8" 1
5/8" 4.9 1-1/2" 0.8
3/4" 3"."5    

This Graphite packing is braided construction from non-asbestos synthetic fibers. Each strand is lubricated with a special vegetable and marine oil and Graphite. When the braiding is finished the surface of the packing is Graphite coated so that the packing does not wick because of the lubricant.
Service Type: A very versatile plant maintenance packing for reciprocating and rotary equipment. Also for medium and high pressure
Industries: Marine, Boiler, Chemical, Oil and Refinery
Recommended Usage: Oil, Steam, Alkalines, Mild Acids and Brine
Service Conditions
Temperature: 450 F (232 C)
PH Range: 4 - 10
Pressure: Up to 300 psi in dynamic service
Shaft Speed: Up to 1900 FPM
Size: ½" and under are sold in 5 lbs/box. 5/8" and up are sold in 10 lbs/box
The chart shows approximately how many lineal feet per lb of packing.

Natural Flax Fiber Packing

Natural Flax Fiber Packing
Size Lin Ft/lb Size Lin Ft/lb
1/4" 28.0 7/8" 2.6
5/16" 18.6 1" 1.9
3/8" 13.3 1-1/8" 1.5
1/2" 7.7 1-1/4" 1.23
9/16" 6.1 1-3/8" 1
5/8" 4.9 1-1/2" 0.8
3/4" 3.5    

The flax fiber packing is square plait braided of fine quality imported flax rovings that have been lubricated with a pure edible tallow and a wax compound. Does not contain graphite.
Service Type: rotary, reciprocating and centrifugal shafts, stern tube plungers, hydraulic rams, accumulators
Industries: Pulp & Paper, Marine, Waste Treatment, Steel and Mining
Recommended Usage: brine, cold water, cold oil, high-pressure rams and accumulators and high-speed shafts.
Service Conditions
Temperature: 200 F (105 C)
PH Range: 5 – 9
Pressure: Up to 150 psi (rotating / centrifugal)
Shaft Speed: Up to 1900 FPM
Size: ½" and under are sold in 5 lbs/box. 5/8" and up are sold in 10 lbs/box
The chart shows approximately how many lineal feet per lb of packing.

Teflon Packing

Teflon Packing
Size Lin Ft/lb Size Lin Ft/lb
1/4" 28.0 7/8" 2.6
5/16" 18.6 1" 1.9
3/8" 13.3 1-1/8" 1.5
1/2" 7.7 1-1/4" 1.23
9/16" 6.1 1-3/8" 1
5/8" 4.9 1-1/2" 0.8
3/4" 3.5    

This Teflon packing is braided non-asbestos synthetic yarn where fibers are impregnated with Teflon Suspensoid and Teflon particles to seal the packing. Thus allowing it to prevent penetration of chemical fluids and chemical action. After braiding, another coating of Teflon Suspensoid and a light oil are applied as a break-in lubricant.
Service Type: This is an excellent general service packing. Reciprocating and rotary pumps, helical motion service, agitators, mixers, expansion joints and autoclaves
Industries: Steam, Boiler, Chemical, Pulp and Paper
Recommended Usage: General chemical plant service and conditions, paper stock, mild acids, corrosive acids, petroleum, synthetic oils, moderate alkalis, aromatic and aliphatic solvents, ink, and steam.
Service Conditions
Temperature: -110 F (-100 C) to 500 F (260 C)
PH Range: 3 – 12
Pressure: Up to 500 psi (rotating / centrifugal)
Shaft Speed: Up to 1900 FPM
Size: ½" and under are sold in 5 lbs/box. 5/8" and up are sold in 10 lbs/box
The chart shows approximately how many lineal feet per lb of packing

Flexible Packing Hooks with Permanent Tips

Flexible Packing Hooks Steel Shafts

These hooks are very strong and made of the toughest materials. Two spiral steel shafts, one inside of the other, wound in opposite directions, make up the shaft. The corkscrew tip is permanently attached. Available in 3 different sizes.

Size Length Shaft Dia. Spiral Dia.
#1 7-1/4" 9-64" ¼"
#2 10-3/4" ¼" 5/16"
#3 15-1/4" 3/8" 3/8"
Flexible Packing Hooks